Contents
- Return to Main Site
- Return to Product Page -
Next Page
Custom Page Settings
On the rare occasion that the document cannot be scanned at 200, 300, or 400 dpi on letter, legal or A4 paper a custom settings file can be created to locate and read the bar code. Please note if you would like to skip this please contact eDocfile and have a sample non-confidential file that can be used for testing and we will do it for you.
Begin clicking on Start \ Run and then entering "C:\barcodeemail\bcPlacement.exe"
And clicking on "OK"
The Barcode splitter template creator will open.
Follow these steps:
1. Click on "Load File…" and browse to the sample cover page to be setup.
2. Click on "AutoSize" to fit the image in the Window. The "Z+" and "Z-" can be used with the scroll bars as well if necessary to get a better view of the image.
3. Hold down the left mouse button and draw a box around the top barcode on the page.
4. Select the rotation of the page, in this example it need to be rotated 90 degrees to be upright, so 90 is selected.
5. Adjust the Confidence level and Contrast if necessary. The confidence level should be set between 70 - 80. It is next to impossible to get over 80 even with files that are printed virtually.
6. Click on "Test" and "SEPARATOR" should appear as the result. If it does not, change the confidence level, contrast or area.
7. Uncheck "Code 39" and place a check in the box next to "Code 128"
8. Click on "Add Region" and the settings for the barcode will appear in the box below. Repeat steps 3 and 6 each time adding the region until all four barcodes are read.
9. Click on save and save the file to C:\barcodeemail\CPSSettings\custom.ini
Once Saved click on Exit
The settings can now be used in the setup.