Contents - Product Page


Step One - Zone One



1 - This is the sample file used for setting up the locations and for testing blank page separation.
2 - This is a name for the zone it will become a title for a data enter box for failed files.
3 - The area that is going to be captured and read. it is set by clicking on the "Get Zone" button
4 - Place a check in this box to apply Fuzzy Logic. If this is checked it will be applied before an EasyPattern
5 - Click here for quick help on Fuzzy Logic
6 - Place a check in this box to validate the data with an EasyPattern. If at all possible this should be used.
7 - Click here for quick help on EasyPatterns
8 - Enter the EasyPattern to apply
9 - Enter the occurrence of the EasyPattern.

Notes: on Zone One

"Zone One Name" and "Zone One Location" must be entered for the program to run. In other words the program will not process Zone Two if there is no Zone One. 

Scan a sample file in the same manner you will use for batch processing. Ideally it will be a 300 dpi G4 Tiff image. 

One common mistake is when using a copier to scan is the user sets the output as a PDF. This program processes Tiff images only, it can create PDF output, but it cannot process PDF input.

Fuzzy Logic should be tested before being used on anything that is not very common. For instance an OCR engine reading an "O" as a "0" would be common. What would not be is a "5" being read as a "b". 

If at all possible use an EasyPattern for validation. If there is supposed to be a 6 digit number returned set it as such so that if something else is returned the file will be put in the Failed File folder for manual processing.

File separation only works with G4 tiff images. The images must be clean as the program searches for black pixels to determine if it is blank. Therefore there can be no lines down the page from a dirty scanner, borderss on the image or punch hole circles.